GENUINE BREMBO FRONT BRAKE MASTERCYLINDER RE-SEAL KIT.
INCLUDES THE SIGHT WINDOW & SEAL.
FOR THE 1985-1988 BREMBO FRONT DISC BRAKE MODELS.
THESE PARTS WERE NEVER AVAILABLE FROM HUSQVARNA.
When rebuilding & taking the internals apart YOU MUST PAY CLOSE ATTENTION TO THE ORDER OF THE INNER COMPONENTS AS THEY COME OUT, NOT HARD TO PERFORM BUT LAY THEM OUT IN ORDER. TAKE PICTURES WOULD BE ADVISABLE.
THE CRITICAL PART IS THE LAST COMPONENT TO GO IN, THE RUBBER BOOT WITH THE INTEGRATED METAL RETAINING RING. THE RING MUST SEAT INTO THE INNER GROOVE ON THE INSIDE BORE OF THE M/CYLINDER. YOU CAN EASILY PUSH THE RING PAST THE INNER GROOVE SO GO SLOWLY.
USING A DEEP SOCKET, slowly push the rubber boot with retaining ring INTO POSITION, GO SLOW & YOU WILL FEEL WHEN IT SLIPS INTO THE GROOVE.
